Providing Free Wi-Fi to New York City
Providing Free Wi-Fi to New York City Defining the Solution: New York City is a city with a large population of people, lots of skyscraping buildings, numerous businesses, and a lack of available free WI-FI service. Today we will be working on developing a way to provide free WI-FI to all of New York City. First we have to look at the reasons, resources needed, and problems which will be on the road to providing such service to New York City. To define the problem a little in depth, we need to find out the necessities needed. 1.
There needs to be a study conducted to figure out how a system can be placed in a city that is so rich in life, but cluttered with buildings and minimal available space for equipment installation. 2. The city needs to campaign a project, letting the people know what they are trying to do to bring such service to them. 3. Bring in network companies to provide the service. 4. Chart a project cost budget: i. e. -material cost, man power, and location cost. 5. Survey areas where service will be needed most. 6. Survey and gather information from the population on what service provider they use and service plans are used most.
This will ensure that there are no network conflicts when the free WI-FI project is completed. 7. Schedule meeting with companies and experts in these technical areas to gather information. This will be information that can be charted or graphed. 8. Analyze all information, graphs, and charts that they have, to see problem areas and solutions to other problem areas. I am expecting that there will be many roadblocks to the road success. There will be many obstacles that will have to be problem and we will overcome these problems.
But to develop a way to make WI-FI available to all of New York City will be tough project. It will be a tough project, however with great organization it can be a successful project. I believe with reliable and professional teamwork, it will be available in the future. Generating a Solution: Defining the problem for developing a solution to provide free WI-FI for all of New York City has been addressed. We have categorized where the problems lay and discussed what is needed to show the problems that exist. Now that the problems are defined, solutions need to be generated to piece together he problems. In order to generate a solution, a team comprised of technology professionals, state officials, city officials, private and non-profit developer organizations, the voice of the people, and a list of detail equipment needed and the cost of the equipment will need to be brought together as one. First is to assemble a group of broadband and wireless experts, so we can gather possible answers to the defined problem. After getting a starting point, data needs to be portrayed on charts, reports, and diagrams. This information can then be brought to the attention of city and state officials.
The voice of the people can be a key to what is being used and what is needed to suit their needs for wireless connection. So surveys need to be sent out, public hearing need to be set up, and gather information from wireless companies to see what is being used today by the people. When setting up a public hearing, a panel of expert will be needed to answer the question that the people may have. Also to seek answers the experts will have for the people so they can configure the amount of technology is needed to make the project possible.
The roles of the city government and the private and non-profit developers can be a major factor on how and where to start the wireless project. We would need the approval from these groups to have a starting point. Also we would see what resources the city already have and what is needed to included in a report for financial purposes. The financial report is essential to show what is already available for use in the project and what resource is needed plus the cost for the needed equipment. Then a starting location(s) will be needed to begin the project.
Possible locations (ie: city parks) for wireless hotspots can be a good starting expansion point. To generate a solution we need: 1. Broadband and Wireless Experts 2. Approval from the City Government 3. Private and Non-Profit Development Organizations 4. State Agency Resources 5. The voice of the people 6. Locations 7. Financial Resources 8. Financial Report of Resource and Equipment Cost The next step is to gather all the possible solution information and analyze the data. Deciding a Course of Action:
In generating a solution, we have learned that there are a variety of resources that have to be looked at in order for a solution to be found. We found that a team of technical professionals (ie: wireless carrier companies, IT organizations, and city electrical development department) is needed for wireless development. The voice of the people; to see what wireless carriers are being used, to survey where they use it more, and where they would like to use the wireless service at. State and city officials are needed to help implement the project by vote of approval. Private and non-profit organizations are needed to fund this project.
Last is to purchase the equipment for wireless capability. Deciding a course of action for the solution means that we need to take a look at what is at the top of the priority list. At the top of the priority list would be to speak with technical professionals, to see if it is possible to supply the wireless without any possible signal problems to disrupt the use of wireless service. Through this we can generate a list of resources that are needed. After speaking with various technical professionals, we see that location is also a factor when it comes to wireless service.
After conducting a grid survey, a decision is made to use local and state parks as areas for project development. Through this detailed reports and charts are made for state and city officials and private and non-profit development organizations to view the results. Next a survey is sent out to the people to see if the technical professionals and grid survey team studies are correct. As the surveys are collected and read, it is determined that the studies are correct and the parks will be accurate locations for project development. With the completion of the surveys from the people, the information is then added to the project report.
In addition to the report, survey charts are created to show the mapped locations for possible WIFI development service. Plus, bar and line charts will show why these locations were chosen, as well as additional charts to show the results of the surveys sent out to the people. Third course of action is to petition to speak with the state and city officials and present the report that can provide the Free WIFI access to the city and its people. By doing this, we can seek approval to start the development and to seek the both private and non-profit development organizations.
These development organizations will help finance the development project and make it a reality. After attending numerous meetings with state and city officials, technical professionals, development organizations, and getting the approvals that is needed to start development. The last course of action is to purchase the equipment that will provide the WIFI service. The WIFI project will only give access in state and local park areas, this type of WIFI access service will be considered Hotspots or Hotzones for the free WIFI access. Implementing the Solution:
Deciding the course of action has shown what the top priorities are and has helped develop the steps to getting started. Next is to implement the solution to make it a reality. A proposal was submitted to address state officials and local city council about the proposed project development. In turn we received a response from these governing offices that we will be heard on the subject of providing the Wi-Fi service to the city. Before we attend the scheduled day, we must overlook the project report and charts, to see that all the information is correct and formal.
By going back and double checking everything will help us be more confident when we sell the idea, plus we will be well prepared to answer any questions that may be addressed. After looking over all the charts and the project report, it was noted that a project schedule timeline and a budget chart was not created. So we decided to send out a research team to determine how much time will be needed to complete the project and at what cost. First a Gantt chart is created to show the activity process, along with the months and year that each activity will be taking place.
We can also have a visual schedule to see what task is in development and at when the deadline should be. Next is to create a budget list (chart). The chart will show the cost for employment of personnel (salaries& contracted personnel), equipment use (purchased or rented), Travel expenses (if any), technology supplies and equipment, and last is to show the projects overhead cost. A budget chart is vital when speaking to government officials and organizations funding the project. The project budget cost can be a factor if we get the funding and/or approval.
Now that project report is completed and all the required information is within the report, we are now ready to present it to the government officials. As the day comes and all the important variables are presented to the council of officials, we wait till they discuss the development project. The development project finally receives the approval, which moves the project to the next part of the implement stage. Checking the Gantt chart, we see that we need to employ a development team. This team needs to consist of IT experts and professionals, project managers, and a team of hands on working professional.
We also need to purchase all the necessary technological (laptops, desktops, software, and communication devices) and development equipment needed to start the project. Next we need to schedule several meeting with the major wireless carriers to introduce to project in development and to try to influence them to be the wireless provider company. In order to choose the right companies to contact, we will schedule a public meeting to speak with NYC residents. By doing this we can see who is the major providers that the public use.
Through several public meetings, we find out that AT&T and Verizon is the two providers that are used to most. So we call and schedule a meeting with the board of directors from both companies. Plus we have to schedule the proper flights to get to the corporate offices for these companies. After several physical and telephone conference meetings, both corporate providers agree to be involved in the development and would immediately put together a team to assist our development team in installing the necessary networks that we need. Through this, a change is made on the Gantt chart to include these companies and their team.
Plus any cost will also include into the budget chart. With all the project resources that is needed for this project have been brought together, the deployment stage of the project needs to be started. Several meetings are set up to introduce all the executives, project management, government officials, and funding organizations. Construction crews and technical personnel need to be hired. Equipment needs to be ordered and purchased before the start of the project. Checking the development location charts, it has been determined that wireless systems need to be placed on high level areas.
So checking city maps and blueprints, we choose city skyscrapers that have the high altitude we need. Checking with the buildings management and owners, we started to implement the wireless system construction. As the project goes through the various stages of the development; we consistently monitor the Gantt chart to make sure that the project is on schedule, continue to check for any potential paradigm shifts that can cause a delay, make sure that there is coordination of all tasks and personnel, and evaluate each completed task along the way.
Experimental test are conducted throughout the development stages, to make sure that all equipment if properly functioning and compatible with our needs. To avoid any possible setbacks, contingency plans are implemented and alternate plans are made. Any changes to the project must always be reported and charted to keep all departments updated and informed. As we can see, this development project has many variables while implementing any solutions. We have to keep on track during the process and evaluate all solutions as they presented.
Evaluate the Solution With the implementation of the project development, we need to consistently evaluate the solution. By doing this we will see: if the solution is logical and solves the real problem, if the solution is (economically, environmentally, politically, and ethnically) responsible and safe, does it meet all the criteria and constraints, is it blunder-free, have we argued the positive and negative sides of the project, and check the procedure and logic of the arguments.
We also have to create an ethics checklist to see if it is legal (will it violate civil law or company policy? ), will it be a win/win situation, will it be fair to all concerned in both the short term and long term, and will I be proud during the development stages and/or conclusion. We also have to remind ourselves about “purpose”. What is the purpose of why we started this project and what is the purpose of seeing this thru till the end? I see this as a motivation tool to make sure that we maintain the excitement of the project.
While we are evaluating the solution, we need to implement a contingency plan for each stage of the development process. This will ensure that there is a back-up plan if we experience a paradigm shift or the project is at a development down fall. After conducting a thorough evaluation of the solution and development process, we come to the conclusion of the project. By taking the steps to seeing the project through from defining the solution to evaluating the